Stairlift selection is a huge process. Unfortunately, there is so much wrong information posted on the internet. because the popularity of stair lifts as mobility and access equipment increases.
The selection of an Outdoor Chairlift is even more difficult because some awful products with a low specification are available that are well marketed to be attractive to the unwary buyer. So what do you have to look for in an outdoor lift on Birmingham Stairlifts. Well, there are five main areas that must be carefully considered. The guide rail or track Characteristics of the drive unit or car The chair construction and cover The remote control The expertise of the installer and support for the sale MediTek outdoor stairlift The guide rail: Whatever tilts you, make sure it has a positive drive method, such as a rack. Always avoid all obsolete cable drawn elevators, as they are potentially much less safe and problematic with prolonged use. Stairlifts are in the simplest form a motorized chair that runs along a guide rail. The guide rail is made of aluminum or steel, but the best modern stairlifts choose to use hollow extruded aluminum because the web is completely exposed to the elements and less susceptible to corrosion. A considerable part of the cost of the outdoor stair lift is the rail system and some manufacturers have chosen to make the rail as thin and light as possible to keep the costs clean at the expense of stiffness. Ask for an anodised rail finish (very hard aluminum chemical surface treatment) and solid rail with thick cross-section at full size. The carriage: This is the heart of the stairlift and drives the chair up and down the stairs. The moving parts of the car are covered with a molded housing and so the construction materials of the chassis can deviate from those of the rail. The car must have a folded steel structure for strength and durability, because enormous forces are exerted on these parts when lifting and lowering the stairs. Stay away from aluminum castings used by some manufacturers for the chassis construction. They are absolutely light and inexpensive to make, but are prone to severe cracks and breaks under the inevitable shock and cyclic load of passengers going up and down the chairlift. The wagons are guided by rollers that run on the rail to allow them to drive straight and to keep the drive wheel accurately in the rack in all conditions. The rollers must have sealed ball bearings to ensure that they roll smoothly over the life of the stairlift. A very good indication of a cheaply made stairlift is if it has plastic rollers on roughly twisted shafts without good bearings. High-quality lifts have a maximum of 12 rolls, while the budget lifts can only have eight. click here The chair construction and cover: An indoor lift is magically not really an outdoor stairlift by selling it with a plastic bag to hide it and seal the elements, but that is what some manufacturers offer. The seat covers should be designed primarily to keep the seat clean and dry for when you want to use the lift. Lids must be well watertight, but easy to remove and cover after the lift has been used. Question, Will the outer stairlift work with the hood in place when the remote control is used?
0 Comments
|
ArchivesCategories |